OmniBreeze DC2018 - Troubleshooting

TROUBLE SHOOTING
Problem Possible Cause Solution
The plug is not fully inserted into | Make sure that the plug is fully inserted into the base AC
the wall outlet. wall outlet.
The wall outlet experienced an Unplug the fan. Inspect the main electrical breaker box. If
you find a tripped breaker, reset it. If the problem persists,
overload. x 3 ag
à contact a qualified, licensed electrician.
The fan is not Remove and inspect the fuse located in the plug. If the
operating Fuse in plug failed. fuse is tripped, replace with the appropriated fuse rated as
(For US, Mexico and UK)
specification listed on page 2. If the problem persists,
contact a qualified, licensed electrician.
The fan is defective.
Contact customer service at service@singfun.com.cn
or call 1-866-505-1001 for assistance.
|—__—
Inspect the battery to ensure it is
Make sure remote is pointed toward front infrared window
of fan.
during assembly; however there
is a possibility that parts can be
omitted.
The remote control i Replace the battery. For best performance we recommend
does not operate the eae neralan; using a DL2032 battery.
fan . If the problem persists, contact customer service at
The battery is expired. service@singfun.com.cn or call 1-866-505-1001
for assistance.
The fan(s) are Omitted parts are extremely rare
missing parts due to stringent quality control | Contact customer service at service@singfun.com.cn
or call 1-866-505-1001 for assistance.
39: