00072954.DOC, Version 1.0 19/20
6.5 Announcements via the DJ microphone
1 Adjust the volume of the microphone announcement with the control MIC LEVEL.
2 Adjust the desired sound with the tone control MIC EQ: Turn the control to the left for a more bass-
emphasized sound, turn the control to the right for a more treble-emphasized sound.
3 To improve the audibility of an announcement during the current music program, press the button
TALKOVER (red LED lights) to activate the talkover function. Then during a microphone
announcement, the levels of channels 1 and 2 are automatically attenuated by 20 dB.
6.6 Playing MP3 files
The integrated MP3 player is intended for the background program and not for the main program.
Accordingly, the MP3 player’s signal is directly sent to the master output; it is not affected by the TALKOVER
switch and cannot be routed to the headphones output.
1 Insert a USB device into the USB port. After loading a device, it is selected as the playback medium
and read in. Press the button [►II] to start the playback of the first title. To interrupt the playback, press
the button [►II] once again.
2 Adjust the desired volume for the MP3 player with the level control USB LEVEL.
3 With the buttons [] and [], you can skip titles in forward or backward direction and start fast forward
and reverse:
• short actuation of the button []
: skip to the next title
• short actuation of the button []: skip to the previous title
• long actuation of the button []: fast forward
• long actuation of the button []: fast reverse
4 To remove a USB device, disconnect it from the USB port. Prior to removing a device, always terminate
the playback with the button [►II]. Otherwise damage or loss of data may occur.
Regarding USB devices
• This unit supports USB devices with the file system FAT32 and with a capacity up to 32 GB.
• This unit does not recognize folders. All MP3 files must be stored in the root directory of the memory.
The files will be played in alphabetical order.
• The MP3 player features an auto repeat function, i. e. all titles of the data carrier are continuously
played.
• This unit supports MSC (Mass Storage Class) USB storage devices 1.0, 1.1, 2.0 including external
portable flash memory devices and digital audio players. However, hard discs, optical discs such as
external CD/DVD drives will not be recognized. Depending on the device used, proper playback may
not be possible with all USB devices.
• If a USB device is not recognized at the first try, remove it and insert it again.
7. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
To Next Page
Loading...
Need help?
General
