Omron 3G3M1-A4007-ECT - Page 234

Parameter
No.
Function name Monitor or Data Range
Default
data
Setting
during
RUN
Unit
X78 Last Alarm Info. Running Status 3
Bit15: ---
Bit14: OL (Overload warning)
Bit13: LOC (Light load detec-
tion)
Bit12: OL2 (Overload warning
2)
Bit11: OLP (During active
drive)
Bit11: OLP (During active
drive)
Bit10: LIFE (Life warning)
Bit9: OHF (Fin Overheat warn-
ing)
Bit8: TR
Y (During retry)
Bit7: FAN (Fan operation sig-
nal)
Bit6: REF (RUN command
source)
Bit5: THM (Thermal warning)
Bit4: IPF (During restart after
instantaneous power failure)
Bit3: SETM (2nd motor selec-
tion)
Bit2: IRDY (Operation ready)
Bit1: FDT1 (Over set Frequen-
cy arrival)
Bit0: FAR1 (Constant speed
arrival)
0 - -
X97
Input Input Terminal [PTC] Input
Voltage
-0.0 to 12.0
0 - V
X108
Latest Alarm Info. Cumulative
Running Time
0 to 655350 hour
0 - h
X118
Last Alarm Info. Cumulative Run-
ning T
ime
0 to 655350 hour
0 - h
X128
Second last Alarm Info. Cumula-
tive Running Time
0 to 655350 hour
0 - h
X138
Third last Alarm Info. Cumulative
Running Time
0 to 655350 hour
0 - h
4 Parameter List
4-68
M1 Series Standard Type User's Manual (I669)