Need help?Do you have a question about the Omron 3G3MX2 Series and is the answer not in the manual?
General| Frequency Range | 0.1 to 400 Hz |
|---|---|
| Control Method | V/f Control, Sensorless Vector Control |
| Overload Capacity | 150% for 60 seconds |
| Safety Standard | CE, UL, cUL |
| IP Rating | IP20 |
| Output Voltage | 3-phase 200-240V AC |
| Output Frequency | 0.1 to 400 Hz |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheat, Ground fault, Short circuit |
| Ambient Temperature | -10 to 50°C |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -20 to 65°C |
| Humidity | 5% to 95% RH (non-condensing) |
| Altitude | Up to 1000 m |
| Braking Unit | Built-in |
| Communication | Modbus RTU |
| Communication Interface | RS-485 |
| Cooling Method | Forced air cooling |
| Enclosure Rating | IP20 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overload |
Explains the core features and functions of the Drive Programming system.
Details the required hardware and software for setting up Drive Programming.
Lists the technical parameters and capabilities of the Drive Programming feature.
Outlines the step-by-step process for using Drive Programming.
Details inverter parameters relevant to Drive Programming configuration.
Guides on launching and initializing the Drive Programming software editor.
Explains the layout and components of the Drive Programming Editor interface.
Introduces user variables for program logic and parameter adjustment.
Details variables for controlling inverter I/O terminals.
Organizes the available commands into logical groups.
Explains commands for managing program flow and execution logic.
Covers commands for mathematical and logical operations within programs.
Explains parameter dependencies and setting order considerations.
Provides guidance on identifying and resolving common errors.
Details setup requirements for LX inverter with Drive Programming.
Explains user variables specific to the LX inverter.
To Next Page
