Omron 3G3MX2 Series User Manual

Manual Configuration
2
Drive Programming User’s Manual (I580-E2)
Manual Configuration
This manual is compiled section by section for user's convenience as follows.
Section Overview
Section 1 Overview
This section describes an overview and the system configuration
of the Drive Programming.
Section 2 Specifications
This section describes the specifications of the Drive Programming.
Section 3
Operation Procedure for Drive
Programming
This section describes the operation procedure of the Drive
Programming, related parameters, and program structures.
Section 4 Drive Programming Editor
This section describes how to start the Drive Programming
Editor, saving and loading data, and details on parts of the
Editor.
Section 5
Drive Programming User Variables
This section describes the user variables provided for
Drive Programming.
Section 6
Drive Programming
Commands
This section describes the commands provided for Drive Programming.
Section 7
Precautions for Use of
Parameters for Drive
Programming
This section describes the precautions for use of parameters for
the Drive Programming.
Section 8 Errors and Remedies
This section describes the program operation at the time of error
occurrence, the errors that are specific to the Drive
Programming, as well as the causes and remedies.
Section 9 LX inverter This section describes the LX inverter specific functions.

Omron 3G3MX2 Series Specifications

General

Frequency Range	0.1 to 400 Hz
Control Method	V/f Control, Sensorless Vector Control
Overload Capacity	150% for 60 seconds
Safety Standard	CE, UL, cUL
IP Rating	IP20
Output Voltage	3-phase 200-240V AC
Output Frequency	0.1 to 400 Hz
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground fault, Short circuit
Ambient Temperature	-10 to 50°C
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 65°C
Humidity	5% to 95% RH (non-condensing)
Altitude	Up to 1000 m
Braking Unit	Built-in
Communication	Modbus RTU
Communication Interface	RS-485
Cooling Method	Forced air cooling
Enclosure Rating	IP20
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload