Omron 3G3MX2 Series User Manual

Related Manuals
14
Drive Programming User’s Manual (I580-E2)
Related Manuals
You need information on the devices connected for operating this product.
Please see the manuals below for related product information.
Additional Information
For the inverter operation, refer to the MX2 User's Manual (I570-E2) or the RX User's Manual
(I560-E2).
Name Catalog number
MX2 User's Manual I570-E2
RX User's Manual I560-E2
CX-Drive Operation Manual W453

Omron 3G3MX2 Series Specifications

General

Frequency Range	0.1 to 400 Hz
Control Method	V/f Control, Sensorless Vector Control
Overload Capacity	150% for 60 seconds
Safety Standard	CE, UL, cUL
IP Rating	IP20
Output Voltage	3-phase 200-240V AC
Output Frequency	0.1 to 400 Hz
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground fault, Short circuit
Ambient Temperature	-10 to 50°C
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 65°C
Humidity	5% to 95% RH (non-condensing)
Altitude	Up to 1000 m
Braking Unit	Built-in
Communication	Modbus RTU
Communication Interface	RS-485
Cooling Method	Forced air cooling
Enclosure Rating	IP20
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload