4 Drive Programming Editor
4 - 22
Drive Programming User’s Manual (I580-E2)
4-8 Saving Programs
There are two ways to save programs created with the Drive Programming function as described below.
Select a way suitable for your purpose.
Saving whole CX-Drive project
By saving the whole project created with the CX-Drive, you can save all drive data including the Drive
Programming program.
Click [File] in the Menu bar, select [Save As] and enter the file name.
When a saved project is opened, the Drive Programming program included in the project is automati-
cally loaded.
You can display the program by double-clicking the Drive Programming in the Workspace and start the
Drive Programming Editor.
To Next Page
Loading...
