Omron 3G3MX2 Series - 9-1 Preparation and System Configuration

9 LX inverter
9 - 2
Drive Programming User’s Manual (I580-E2)
9-1 Preparation and System
Configuration
You must prepare the following items to create user programs with functions of the Drive Programming
in CX-Drive and execute the programs in the 3G3LX Series Inverter.
• 3G3LX Series Inverter
• Personal computer (PC) (Windows system)
• The CX-Drive requires the version 2.5 or higher for 3G3LX Series Inverter
(The CX-Drive is included in the FA Integrated Tool Package, CX-One.)
• Prepare the following PC-inverter connection cable.
USB to RJ-45 Converter Cable (Model: 3G3AX-PCACN2 or USB CONVERTERCABLE)
Version Information
• The Drive Programming function is included in the following or higher versions of the
CX-Drive.
If the version of your CX-Drive is lower, you need to upgrade the version.
LX: Version 2.5 or higher (with version 2.4 or lower, operation is not possible.)
Additional Information
For how to install or upgrade the CX-Drive, refer to the CX-Drive Operation Manual (W453).
32-bit PC 64-bit PC
Windows XP SP3, Windows Vista, and Windows 7 Windows Vista and Windows 7
USB
USB-RS422
Converter cable
3G3AX-PCACN2
Remove the Digital Operator
(A) and the connector (B).
(A)
(B)
Connector for the Digital Operator
RJ45 connector
CX-Drive