Need help?Do you have a question about the Omron 3G3M1-STD and is the answer not in the manual?
General| Model | 3G3M1-STD |
|---|---|
| Category | Inverter |
| Manufacturer | Omron |
| Overload Capacity | 150% for 60 seconds |
| Communication Interface | RS-485 (Modbus RTU) |
| Enclosure Rating | IP20 |
| Input Voltage | 200V to 240V |
| Output Voltage | 0 to Input Voltage |
| Control Method | V/f control |
| Frequency Range | 400 Hz |
| Protection Features | Overcurrent, overvoltage, undervoltage, overheat, ground fault, short circuit |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 60°C |
| Ambient Humidity | 90% RH (non-condensing) |
Specifies target audience and provides important notices.
Outlines the terms and conditions for using the product.
Explains safety notations, symbols, and warnings.
Details model naming, specifications, and physical dimensions.
Provides guidelines for installing the inverter, including orientation and clearances.
Overview of terminals and the main connection diagram.
Explains dip switches and selection of input logic (PNP/NPN).
Details configuration for multifunction digital inputs and outputs.
Identifies and describes the components of the operator panel.
Explains how to operate the inverter using the digital operator panel and its modes.
Details the functions and menus available in the 'Program Mode'.
Sets essential motor parameters for stable inverter operation.
Guides through the auto-tuning process for induction motors.
Lists important parameters and configures frequency reference and control.
Configures speed, digital I/O, and analog output settings.
Practical examples for operating the inverter via panel, buttons, and signals.
Covers safety functions, response times, and related parameters.
Explains how to activate safety functions and provides wiring examples.
To Next Page