Omron 3G3M1-STD User Manual

3
Introduction
Thank you for using the QuickStart guide: 3G3M1-STD Snabbstart V1.0.0
Use it when programming with the automation software Sysmac Studio.
This manual contains information that is necessary to use the product as is and/or together with
Sysmac Studio.
1.1. Intended Readers
This manual is intended for the following personnel.
Those who have knowledge of electrical systems (an electrical engineer or the equivalent) and
also are qualified for one of the following:
• Personnel in charge of introducing the control equipment
• Personnel in charge of designing the control systems
• Personnel in charge of installing and maintaining the control equipment
• Personnel in charge of managing the control systems and facilities
1.2. Notice
This manual describes the necessary information to get started with the 3G3M1. Refer also to
the following manual’s for more information.
Name
Catalog
No.
Model
Application
Description
Sysmac Studio Version
1 Operation Manual
W504
SYSMACSE2
□□□
To learn about how to
operate Sysmac
Studio and its
features.
Describes how to operate Sysmac
Studio.
Sysmac Studio Version
V1 Drive Functions
Operation Manual
I589
SYSMACSE2
□□□
To learn about how to
set and adjust the
servo driver.
Describes how to operate
Sysmac Studio.
3G3M1 Standard Type
User's Manual
I669
3G3M1 STD
Multi-function
Compact Inverter
Describes the installation/wiring of
the 3G3M1 Series Inverter, and
parameter setting method which is
required for the operation, as well
as troubleshooting and inspection
methods.
Please read and understand this manual before using the 3G3M1 Standard Type. Keep this
manual in a safe place where it will be available for reference during operation.

Omron 3G3M1-STD Specifications

General

Brand	Omron
Model	3G3M1-STD
Category	Inverter
Language	English