Omron 5 Series User Manual

30
4.3 Disabling/Enabling Bluetooth
Warning
• This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT
use this product in locations where RF is restricted, such as on an
aircraft or in hospitals. Turn off the Bluetooth feature in this monitor and
remove batteries when in RF restricted areas. For further information on
potential restrictions refer to documentation on the Bluetooth usage by
the FCC.
4. Using Your Monitor with a Smart Device
Bluetooth is enabled as default.
1. When your monitor is off, press and hold the
button for more than 10 seconds.
“oFF” flashes 3 times.
2. Press the [START/STOP] button to turn your monitor off.
Note
• To enable the Bluetooth, press and hold the button for more than
2 seconds. “on” appears on the display.
• Your monitor automatically turns off 2 minutes after the completion.
• When Bluetooth is disabled, the “ ” symbol appears.

Omron 5 Series Specifications

General

Model	BP7200
Type	Upper Arm
Memory Storage	60 readings
Display	Digital LCD
Irregular Heartbeat Detection	Yes
Measurement Method	Oscillometric
Measurement Range (Pressure)	0 to 299 mmHg
Body Movement Detection	Yes
Power Source	4 AA batteries
Measurement Range (Pulse Rate)	40 to 180 beats/min.
Average Reading	Yes
Fits Arm Circumference	22-42 cm
Users	2 users