Omron 5 Series User Manual

31
5. Using Memory Function
Your monitor automatically stores up to 60 readings.
Note
• This monitor can be used by multiple users. When you use memory
function with other users, track (or manage) your own readings
appropriately.
5.1 Viewing the Readings Stored in Memory
1. Press the button.
The Memory number appears for 1.5 seconds before the pulse rate is
displayed. The most recent reading stored in the memory will be
numbered as “1”.
Note
• If the reading is high (refer to sub-section 1.3), the
“ ” symbol appears.
• If there are no readings stored in the memory, the
screen to the right is displayed.
• If the memory is full, new readings will replace the
old readings, starting with the oldest reading.
Alternating
date/time
display

Omron 5 Series Specifications

General

Model	BP7200
Type	Upper Arm
Memory Storage	60 readings
Display	Digital LCD
Irregular Heartbeat Detection	Yes
Measurement Method	Oscillometric
Measurement Range (Pressure)	0 to 299 mmHg
Body Movement Detection	Yes
Power Source	4 AA batteries
Measurement Range (Pulse Rate)	40 to 180 beats/min.
Average Reading	Yes
Fits Arm Circumference	22-42 cm
Users	2 users