Omron 5 Series User Manual

36
appears or a
measurement
cannot be complete
after the arm cuff
inflates.
You move or talk during
a measurement and the
arm cuff does not inflate
sufficiently.
Remain still and do not
talk during a
measurement. If “E2”
appears repeatedly,
inflate the arm cuff
manually until the
systolic pressure is 30 to
40 mmHg above your
previous readings. Refer
to sub-section 3.1.
The systolic pressure is
above 210 mmHg and a
measurement cannot be
taken.
Inflate the arm cuff
manually until the
systolic pressure is 30 to
40 mmHg above your
previous readings. Refer
to sub-section 3.1.
appears
The arm cuff is inflated
exceeding the maximum
allowable pressure.
Do not touch the arm cuff
and/or bend the air tube
while taking a
measurement.
If inflating the arm cuff
manually, refer to the
end of sub-section 3.1.
appears
You move or talk during
a measurement.
Vibrations disrupt a
measurement.
Remain still and do not
talk during a
measurement.
Display/Problem Possible Cause Solution

Omron 5 Series Specifications

General

Model	BP7200
Type	Upper Arm
Memory Storage	60 readings
Display	Digital LCD
Irregular Heartbeat Detection	Yes
Measurement Method	Oscillometric
Measurement Range (Pressure)	0 to 299 mmHg
Body Movement Detection	Yes
Power Source	4 AA batteries
Measurement Range (Pulse Rate)	40 to 180 beats/min.
Average Reading	Yes
Fits Arm Circumference	22-42 cm
Users	2 users