Omron 61F-G1 - Dimensions

61F-G@
14
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ Standard Models
61F-G
Mounting Holes
M3 screw
Four, 6-dia holes
Four, 6-dia mounting holes
61F-G1
61F-G2
61F-I
Mounting Holes
Four, 6-dia holes
Four, 6-dia mounting holes
M3 screw
61F-G3
Mounting Holes
M3 screw
Four, 6-dia holes
Four, 6-dia mounting holes
61F-G4
Mounting Holes
Four, 6-dia holes
M3 screw
Four, 6-dia mounting holes
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.