11
4.Setting and Adjusting Personal Data
EN
4. Setting and Adjusting Personal Data
1. Push the power switch to turn on the unit.
“CAL” blinks on the display, then the display changes to 0.0 kg.
Wait until 0.0 kg appears on the display.
2. Press the USER button to select a personal ID
number.
The ID number changes with each press of the USER
button as follows.
If no information has been entered for a personal ID
number, the personal ID number and the three icons for
gender, age, and height blink, as shown in the illustration.
If information has already been entered, only the
personal ID number blinks.
3. Press the SET button to confirm your selection.
The default setting for the age setting appears on the
display.
SET/GUEST
HBF-400.book Page 11 Wednesday, October 15, 2008 12:05 PM
To Next Page
Loading...
Need help?
General