To Next PageTo Next PageWhy won't my Omron BP5450 arm cuff inflate?
The air plug might not be fully inserted into the monitor. Ensure it is securely plugged in. The arm cuff might not be correctly applied; reapply it and try again. There could also be an air leak in the arm cuff, in which case you should replace it.
What to do if E2 appears on my Omron Blood Pressure Monitor?
If “E2” appears, it could be due to movement or talking during measurement, or insufficient arm cuff inflation. Remain still and silent during measurements. If “E2” appears repeatedly, manually inflate the arm cuff until the systolic pressure is 30 to 40 mmHg above your previous readings. It may also mean that your systolic pressure is above 210 mmHg, in this case you should also manually inflate the arm cuff until the systolic pressure is 30 to 40 mmHg above your previous readings.
What does the Er symbol mean on my Omron BP5450?
The “Er” symbol indicates the monitor has malfunctioned. Press the [START/STOP] button again. If “Er” still appears, no answer.
Why does the E1 error appear on my Omron Blood Pressure Monitor?
The E1 error appears because the arm cuff is inflated exceeding the maximum allowable pressure. To resolve this, do not touch the arm cuff and/or bend the air tube while taking a measurement. If inflating the arm cuff manually, refer to the end of sub-section 3.1.
What does the E4 symbol mean on my Omron Blood Pressure Monitor?
The E4 symbol appears because you move or talk during a measurement, or vibrations disrupt a measurement. To resolve this, remain still and do not talk during a measurement.
What does the flashing bluetooth symbol mean on my Omron BP5450 Blood Pressure Monitor?
A flashing Bluetooth symbol indicates a few possible states: the monitor is waiting to pair with a smart device, the monitor is ready to transfer your readings to the smart device, or there are more than 80 readings in memory to be transferred. In the first case, refer to sub-section 4.1 for pairing your monitor with your smart device, or press the [START/STOP] button to cancel pairing and turn your monitor off. In the second case, open the “OMRON connect US/CAN” app to transfer your readings. In the third case, pair or transfer your readings to the “OMRON connect US/CAN” app so you can keep them in memory in the app, and this error symbol disappears.
What does the heart symbol flashing mean on my Omron BP5450 Blood Pressure Monitor?
The heart symbol flashing indicates that the pulse rate is not detected correctly. To resolve this, apply the arm cuff correctly, then take another measurement. Remain still and sit correctly during a measurement. If the symbol continues to appear, we recommend you to consult with your physician.
Why is the battery symbol flashing on my Omron BP5450?
A flashing battery symbol indicates that the batteries are low. Replacing all 4 batteries with new ones is recommended.
Why does my Omron Blood Pressure Monitor turn off during measurement?
If the monitor turns off unexpectedly or the low battery symbol appears, it means the batteries are depleted. Immediately replace all 4 batteries with new ones.
Why is my Omron Blood Pressure Monitor display blank?
If nothing appears on the display, the battery polarities are not properly aligned. Check the battery installation for proper placement.
General| Model | BP5450 |
|---|---|
| Type | Upper Arm Blood Pressure Monitor |
| Bluetooth Connectivity | Yes |
| Display | LCD |
| Irregular Heartbeat Detection | Yes |
| Average Reading | Yes |
| Hypertension Indicator | Yes |
| Measurement Method | Oscillometric |
| Cuff Size | 22-42 cm |
| Memory Storage | 200 Readings (100 per user) |
| Power Source | 4 AA batteries or AC adapter |
