Omron BP7455CAN - 4.2 Taking Measurement & Data Transfer; 4.3 Bluetooth Disabling;Enabling

4. Using Your Monitor with a Smart Device
31
EN
4.2 Taking a Measurement
Refer to sub-section 3.1 to start a measurement. Open the app on
your smart device and follow the instructions.
Note
•Make sure that your monitor is within 16 ft. (5 m) of your smart
device.
 Transferring Data Automatically/Manually
•When Bluetooth is enabled, the readings will be transferred to your
smart device within 1 hour after taking a measurement.
•To transfer the readings manually, press the button.
4.3 Disabling/Enabling Bluetooth
Warning
• This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use
this product in locations where RF is restricted, such as on an aircraft or in
hospitals. Turn off the Bluetooth feature in this monitor and remove batteries
when in RF restricted areas. For further information on potential restrictions
refer to documentation on the Bluetooth usage by the FCC/ISED.
Bluetooth is enabled as default.
1. When your monitor is off, press and hold the
button (rear surface of the monitor) for more
than 10 seconds.
“oFF” flashes 3 times.