34
5. Using Memory Function
• If the reading is high (refer to sub-
section 1.3), the “ ” symbol
appears.
• If there are no readings stored in
the memory, the screen to the right
is displayed.
• If the memory is full, new readings
will replace the old readings, starting with the oldest reading.
3. Press the or button repeatedly to scroll
through the previous readings stored in the
memory.
: To view the older readings
: To view the more recent readings
To view individual readings in TruRead measurement
The readings with the TruRead symbols ( / ) are
the averages for the consecutive 3 measurements. To view
the individual readings, press the button (rear surface of
the monitor) while the TruRead average is displayed.
1. When a TruRead reading is the past reading displayed on
the left side:
2. When a TruRead reading is the latest reading displayed on
the right side:
To Next Page
Loading...
