20
3. Using the Device
To Delete All the Values Stored in Memory
The values stored in the memory are deleted by USER ID.
1. Select your USER ID (1 or 2).
2. Press the Memory button, while the memory symbol ( )
appears.
3. While holding the button down,
press the START/STOP button for
more than 3 seconds.
Note: You cannot partially delete the values stored in the memory.
All values for the user you select will be deleted.
HEM-7311-ZSA_C_M.book Page 20 Tuesday, April 15, 2014 5:36 PM
To Next Page
Loading...
