Omron C200HG-CPU43 Replacement Guide

10
< Support Software and Peripheral Devices >
Name
C200H-series Unit
CJ-series Unit
Description
Support Software
SYSMAC Support Software
CX-Programmer
CX-One
CXONE-AL□□C-V□/
AL□□D-V□
(CX-Programmer)
SYSMAC Support Software cannot be used
with the CJ2-series CPU Unit.
Peripheral Interface
Unit, Connecting Cable
CQM1-CIF02
Commercially available
USB cable
USB 2.0 (or 1.1) cable
(A connector – B connector) 5.0 m max..
Programming Console
C200H-PRO27
(+C200H-CN□□2)
CQM1-PRO01
None
Use the CX-Programmer or Programming
Console function of the NS-series
Programmable Terminal.
Other remarks
(1) The PFP-50N/100N/100N2 DIN Track and C200H-DIN01 Mounting Bracket can be used to install the
CJ-series Units on the DIN Track.
(2) The CJ-series Unit has an installation structure to be insulated from the control panel (DIN Track). The
C200H-ATT31/51/81/A1 Insulation Plate for CPU Backplane is not required.

Omron C200HG-CPU43 Specifications

General

Brand	Omron
Model	C200HG-CPU43
Category	Controller
Language	English