7
Serial Communications Connection Procedure
3
Check the send/receive
messages in the trace data file
shown in the figure on the right.
(In the example on the right,
"VR"[0D(CR)] version
information acquisition
command of Sensor Controller
is sent, and the version
information (37 bytes)
”ZW-7000␣␣␣␣␣␣␣␣␣
␣Ver2.020␣2016/03/10”
[0D(CR)] is received.)
*The ␣ mark above indicates a
space.
*The response data and the
parameter as shown on the
right are given as information.
For details, refer to 5.
No-protocol Connection of the
Displacement Sensor ZW-7000
series Confocal Fiber Type
Displacement Sensor User’s
Manual for Communications
Settings (Cat. No. Z363).
*A receive message differs
depending on a Sensor
■VR response parameter
Item Size
Model Variable
Space 1 byte
Version information Variable
To Next Page
Loading...
