Omron CJ Series Connection Guide

9
．
Program
63
No. Outline Description
2.3. Normal/error detection
processing
Detects a normal end or an error end of the result of
send/receive processing.
It is considered as a normal end when all the following
conditions are satisfied.
(1)Normal end of PMCR instruction
(No PMCR instruction error)
(2)Normal end of communications sequence
(No communications error)
(3)Normal messages received from Destination Device
(No Destination Device error)
If any of the errors are detected under the conditions
above, a corresponding error flag will turn ON.

Omron CJ Series Specifications

General

Brand	Omron
Model	CJ Series
Category	Controller
Language	English