Omron CJ Series - Installing the PROFIBUS Master Unit

9
．
Program
67
9.6.2. Protocol Macro Data Processing Procedure
The processing procedure of protocol macro data is shown below.
1. [Step No.00]
Issuing send message (SD_VR)
↓
2. When step No.00 ends normally When step No.00 ends in error
↓ ↓
3. Next Process: Receive matrix
Error Process: [Abort］
Executes the case No. 00, 01, 15, and
terminates the communications
sequence as an End.
Interrupts the step and terminates the
communications sequence.
↓
(End)
↓
(End)