6
One family - two performance classes
CJ2M for basic machine automation
The CJ2M Series is ideal for packaging and general
machine automation needs. Connectivity is assured
thanks to the built-in USB port and the choice of
Ethernet and RS-232C/422/485 interfaces on the CPU.
Pulse I/O modules
By mounting optional pulse I/O modules, you can extend the
functionality of any CJ2M CPU with:
interrupt inputs -
high-speed counters -
incremental encoder inputs -
pulse frequency control outputs -
pulse width control outputs. -
Up to two modules can be mounted per CPU, allowing direct control
of four motion axes. Using dedicated instructions, these axes can be
controlled directly by the PLC program, without communication delays.
Available as of Q3 2010
Always accessible through standard USB port -
Standard Ethernet port with EtherNet/IP Data Link function -
Wide range of program capacities, from 5 Ksteps to 60 Ksteps -
Pulse I/O add-on modules have a special connection to the -
CPU and are controlled by convenient positioning instructions
Serial option board for CJ2M-CPU3* -
Dedicated function block memory ensures efficient execution -
of function block software modules
Order/version: 2322837/003 (width: 210mm, height: 297mm)
Print type: CJ2 Family Brochure, Full color, with extra spotcolor(s)
Produced by Adnovate on 02-jul-2010 at 10:27:11 in Adobe InDesign 5.0.4.682
Low resolution proof not suitable for production purposes
Page: 6
To Next Page
Loading...
