Need help?Do you have a question about the Omron CP1L CPU and is the answer not in the manual?
States OMRON's warranty terms for product defects in materials and workmanship.
Details OMRON's liability limits for damages related to product use.
Clarifies OMRON's responsibility regarding product standards and conformity in customer applications.
States OMRON's non-responsibility for user programming of programmable products.
Notifies that product specifications may change due to improvements or other reasons.
States that dimensions and weights are nominal and not for manufacturing.
Clarifies that performance data is a guide and does not constitute a warranty.
Assumes no responsibility for clerical, typographical, or proofreading errors in the manual.
Defines the target audience for this manual, requiring knowledge of electrical systems.
Outlines general guidelines for operating OMRON products according to specifications.
Provides critical safety advice for handling power and terminals to prevent injury or damage.
Advises confirming facility impact before changing PLC modes.
Introduces the different CP1L PLC package types based on I/O points.
Details the various parts and their functions of the CP1L CPU unit.
Explains the manual's structure and workflow for constructing a CP1L system.
Defines the operation and components of the example shutter control system.
Specifies how I/O relays on the CP1L are allocated to contacts for the system.
Presents an example ladder program for the shutter control system.
Provides guidelines for optimal CP1L system installation location and environment.
Explains the procedure for physically mounting the CP1L unit onto a DIN track.
Details the process of wiring power supply and I/O lines to the CP1L unit.
Outlines the steps for performing a power test after wiring the CP1L.
Covers necessary preparations for ladder program creation, including software and connections.
Explains the functions of ladder programs and the shutter control system example.
Guides on starting and using the CX-Programmer software for PLC programming.
Describes how to access and utilize the CX-Programmer help resources for assistance.
Guides on creating new projects in CX-Programmer, setting device and CPU types.
Details how to input contact elements into a ladder program using CX-Programmer.
Explains how to input output coil elements into a ladder program.
Covers the process of inputting timer instructions into a ladder program.
Explains how to compile programs to check for errors using CX-Programmer.
Details the procedure for saving created ladder programs in CX-Programmer.
Guides on how to open and load previously saved ladder programs.
Explains how to add and edit I/O comments via a list of addresses.
Details how to add comments to individual rungs of a ladder program.
Covers methods for editing or deleting rungs and instructions within a ladder program.
Explains how to establish a connection between the computer and the CP1L for configuration.
Covers techniques for monitoring, debugging, and adjusting programs while connected to the CP1L.
Briefly explains channel and relay number specifications and notation for CP1L.
Explains how to use instructions and provides basic instruction details for CP1L.
Details the internal structure, functions, and operation flow of CP1L CPU units.
Provides practical examples for wiring, settings, and programming CP1L.
To Next Page
General
