Omron CP1L CPU - Inputting Output Coils

4-5 Inputting Programs
4
4
SYSMAC CP1L Getting Started Guide 59
Creating Programs
4-5-3 Inputting Output Coils
Input an output coil for the work area.
1. Press the [O] key.
The New Coil dialog box will be displayed.
2. Input address "W0". Press the [Enter] key.
"W0" is entered. The Edit Comment dialog box is displayed with the I/O comment
already entered.
3. Press the [Enter] key.
An output coil for the work area will be displayed on the ladder program.
W07E-EN-02+CP1L+GettingStartedGuide.book Seite 59 Montag, 15. September 2008 11:15 11