5-1 Going Online
5
5
80 SYSMAC CP1L Getting Started Guide
Transferring and Debugging Programs
4. Set the date and time. Click OK.
The Set PLC Clock dialog box will be closed.
5. Select [File] - [Exit] from the menu.
The clock on CP1L is now set.
5-1-2 Changing the Operating Mode
Change to PROGRAM mode.
The procedure for changing to the PROGRAM operation mode is as follows.
1. Select [PLC] - [Operating Mode] - [Program] from the main menu.
A dialog box will be displayed to confirm the operating mode change.
W07E-EN-02+CP1L+GettingStartedGuide.book Seite 80 Montag, 15. September 2008 11:15 11
To Next Page
Loading...
