Omron CJ2M-CPU Series Replacement Guide

Operand4 - System word:
Other information
CQM1H CJ1M/CJ2M
Limitations
in number of
time used.
Once in one program. No limitations
ER flag
operation
- Content of *DM/*EM word is not BCD, or the
EM/DM area boundary has been exceeded.
(EM can be used with CQM1H-CPU61 only.)
- S and S+1 are not in the same data area.
(When set to display 8-digit data.)
- There is an error in operand settngs
- Other than above, ER flag is OFF.
OFF (ER flag does not turn ON with left
errors, since they are handled as Illegal
access error).
Fun No. 88 (Expansion instruction) 214
34

Omron CJ2M-CPU Series Specifications

General

Power Supply	24 VDC
Number of Instructions	Over 400 instructions
Model	CJ2M-CPU11, CJ2M-CPU12, CJ2M-CPU13, CJ2M-CPU14, CJ2M-CPU15
Program Capacity	5K steps to 60K steps
I/O Capacity	Up to 2, 560 points
Communication Ports	Ethernet, USB, RS-232C
Execution Time	0.04 µs per basic instruction
Operating Temperature	0 to 55°C
Position Control	Supported
High-speed Counter	100 kHz max.
Pulse Output	100 kHz max.
Maximum Units	40 units
Storage Temperature	-20 to 75°C
Interrupt Inputs	Supported