Need help?Do you have a question about the Omron CJ2M-CPU34 and is the answer not in the manual?
General| Power Supply Voltage | 24 VDC |
|---|---|
| Operating Temperature | 0 to 55 °C |
| Type | Programmable Controller |
| Program Memory | 60 KB |
| Serial Communications | RS-232C |
| Built-in Ports | RS-232C |
| Instruction Execution Speed | 0.04 μs |
| Humidity | 10 to 90% |
| Vibration Resistance | 10 to 57 Hz, 0.075 mm amplitude |
| Shock Resistance | 147 m/s², 3 times in each direction |
| Storage Temperature | -25 to 65 °C (with no icing or condensation) |
Lists the devices that can be used with the system for serial communication.
Details the hardware components and their connections for the system setup.
Lists the parameter settings required for PLC and Sensor Controller communication.
Details connector configurations and pin assignments for serial communication cables.
Outlines the steps to connect PLC to Sensor Controller for serial communication.
Describes the hardware and parameter settings for the Sensor Controller.
Details the hardware settings, project file loading, and I/O table creation for the PLC.
Explains how to start tracing and confirm normal serial communication operations.
Details the process to initialize the PLC's Serial Communications Unit and CPU Unit.
Refers to the manual for initializing the Sensor Controller.
Explains the program's function for checking the connection between devices.
Details the communications sequences used for the PMCR instruction.
Describes how errors are detected and handled within the program.
Lists the memory addresses used by the program for operation.
Explains the functional components and structure of the ladder program.
Details the composition and processing of protocol macro data.
Illustrates the timing of operations for normal and error conditions.
Provides details on error codes and their meanings.
To Next Page
