Omron CK3W-AX1515N - Page 78

Electrical Specifications of Flag Connection Terminal Block
This section describes the electrical specifications for the flag connection terminal block.
Digital Input
Specifications
Input signal HOME, PLIM, NLIM, USER/Channel
Rated input voltage 5 to 24 VDC
Maximum input voltage 26.4 VDC
Input current HOME, PLIM, NLIM: 7.0 mA typical (24 VDC)
USER: 9.3 mA typical (24 VDC)
ON voltage/ON current 3 VDC min. / 1 mA min.
OFF voltage/OFF current
*1
1.0 VDC max. / 0.1 mA max.
ON/OFF response time HOME, PLIM, NLIM: 20 μs max./400 μs max.
USER: 20 μs max./20 μs max.
Isolation method Isolation by Photocoupler (between input and internal cir-
cuit)
Circuit configuration NPN type
HOME 0 to 3
PLIM 0 to 3
NLIM 0 to 3
USER 0 to 3
V_FLAG 0 to 3
Current control
circuit
Current control
circuit
Current control
circuit
Current control
circuit
Internal
circuit
PNP type
HOME 0 to 3
PLIM 0 to 3
NLIM 0 to 3
USER 0 to 3
G_FLAG 0 to 3
Current
control circuit
Current
control circuit
Current
control circuit
Current
control circuit
Internal
circuit
3 Configuration Units
3-34
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)