Omron E3 Intense User Manual

11
Assembly steps
EN
STEP 3 – Snap either electrode cord to each of the pads
For the ¿ rst time, take the pads out of the sealed package.
Do not turn the unit on, until pads are on your skin.
You must use both pads or stimulation will not work.
STEP 4 – Remove and discard plastic ¿ lm from pads (in case of new pads)
Remove the clear plastic ¿ lm from the back of the pad.
Discard the plastic ¿ lm backing as well as the clear packaging.
STORING PADS ON PAD HOLDER
After using, put sticky side of pads on either side of the pad
holder.
STEP 5 (Optional) – Attach the unit to the belt clip
The clip may fall off if attached to soft or thin clothing.
Pad facing down
Pad Holder
Pad sticky side up

Omron E3 Intense Specifications

General

Product color	White
Number of modes	3
Built-in display	Yes
Number of intensity levels	15
Therapy method	Transcutaneous Electrical Nerve Stimulation (TENS)
Integrated timer	-
Power source	Battery
Package weight	574 g

Weight and Dimensions

Depth	170 mm
Width	60 mm
Height	220 mm