Omron electroTHerapy PM3030 User Manual (English)

Questions and Answers:

J
Joanne WilliamsonJul 31, 2025
Why is the intensity not felt with my Omron electroTHerapy PM3030 Medical Equipment?
- D
  dennis83Jul 31, 2025
  If you're not feeling the intensity from your Omron Medical Equipment, ensure both pads are attached to your body and that you've removed the transparent film from the pad's adhesive surface. Also, check that the pads aren't stacked or overlapping, and the cord is correctly connected to the unit. You may also need to increase the intensity setting by pressing the up button or replace the batteries if they are weak.
S
Sean EdwardsAug 5, 2025
What to do if Omron electroTHerapy PM3030 Medical Equipment power cuts off during use?
- M
  Michael CurryAug 6, 2025
  If your Omron Medical Equipment is cutting off during use, the batteries may be weak and need replacing. Alternatively, the cord could be broken and require replacement.
W
Wesley LyonsAug 11, 2025
Why does my skin turn red using Omron Medical Equipment?
- E
  Elijah JonesAug 11, 2025
  If your skin turns red or feels irritated when using the Omron Medical Equipment, it could be due to several reasons. The adhesive surface of the pads might be dirty or dry; try washing the adhesive surface gently with your fingertips under slow running water for about 3 seconds. It's also possible that the therapy time is too long; limit use to less than 15 minutes. Ensure that both pads are attached properly to your body, and if the pad surface is worn out, replace the pad.
H
hawkinsseanAug 18, 2025
Why is the adhesive surface of my Omron electroTHerapy PM3030 Medical Equipment pad not sticky?
- D
  Dustin LittleAug 18, 2025
  If the adhesive surface of the pad on your Omron Medical Equipment isn't sticky, it could be because you're using the pad while perspiring; avoid using it in such conditions. If you've washed the pads too long or too frequently, try leaving the pad in the freezer overnight. If the pads were stored under high temperature, high humidity, or direct sunshine, you may need to replace them.
T
torreserikaAug 25, 2025
What to do if my Omron Medical Equipment has no power source?
- M
  Mia ThompsonAug 25, 2025
  To solve the 'No power source' problem with your Omron Medical Equipment, check if the batteries are inserted with the correct polarity (+ and -). If they are correctly aligned, the batteries might be depleted, and you should replace them.