Omron electroTHerapy PM3030 - Step 2: Attach Electrode Cord to Unit; Step 3: Attach Pads to Electrode Cord

14
SIMPLE ASSEMBLY STEPS
STEP 2 – ATTACH ELECTRODE CORD
TO THE UNIT
Attach the clip of the electrode cord to the top and plug into the
main unit.
STEP 3 – ATTACH PADS TO THE
ELECTRODE CORD
For the rst time, take the pads out of the sealed package and
remove the clear plastic lm from the back of the pad. Discard
theplasticlmbackingaswellastheclearpackaging.
(In-betweenuses,turnunitoffandkeepelectrodesconnectedto
pads. Place pads onto sides of plastic holder and wrap cord around
holder and store in a dry, cool location).