E3G
A-119E3G
Photoelectric switch with built-in amplifier (long distance) in plastic housing
E3G
Retroreflective Models
• Sensing Distance of 10 m, with polar-
ized light to detect shiny objects.
• Operation stability monitored ba the
stability indicator.
Distance-setting Models
• Distance setting models with a long
2 m sensing distance incorporate a
teaching function.
• Set sensing area (zone setting) func-
tion allows detection of shiny objects
with uneven surface.
Common Features
• Meets IEC IP67 requirements.
• M12 rotary connector, pre-wired or ter-
minal block connection
Features
Though the Size Is Compact, the Sensing
Distance Is as Long as 10m.
Replace the conventional through-beam model with the ret-
roreflective model for saving wiring and installation space.
Easy monitoring of Operation stability by
means of stability indicator.
Retroreflective Models
Reflector
10m
10m
Saves wiring effort
Saves space
ConventionalNew product
Retorore-
flective
model
Through-
beam
The stability indicator becomes
darker due to dust on the lens or
improper optical axis adjustment.
F502-EN2-04.book Seite 119 Dienstag, 26. Juli 2005 5:48 17
To Next Page
Need help?
General
