E5AK/E5CK/E5EK
E5AK/E5CK/E5EK
121
MOUNTING TERMINAL COVER
E5AK and E5EK
1. Fasten the terminals covers as follows by using the plastic
pins. Plastic pins are provided with the terminal covers.
E5CK
E5CK
E53–COV07
1. The E5CK-AA1-500 Controller is provided with a Terminal
Cover (E53-COV07). Fasten the Terminal Cover as fol-
lows by using the plastic pin.
WIRING TERMINALS FOR E5AK
E5AK Terminal Arrangement
TRSF: Transfer output
EV1 to 4: Event input
PTMR: Potentiometer
RSP: Remote SP input
AC100–240V~
50/60 Hz
OPTION
2
OPTION
3
OPTION
1
SENSOR
INPUT
Wiring
In the following wiring diagrams, the left side of the terminal
numbers indicate the inside of the Controller.
Power Supply
Input power to terminal numbers 9 and 10. Power specifications
are as follows: 100 to 240 VAC, 50/60 Hz, approx. 16 VA
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
