What to do if my Omron Controller shows a memory error?
First, try turning the power OFF and then back ON again. If the error persists, the Omron Controller likely requires repair. If the display returns to normal, investigate for external noise affecting the control system.
How to troubleshoot input error *2 on Omron E5EN Controller?
To troubleshoot the input error, check the Input Type parameter setting, inspect the input wiring, and examine the temperature sensor for breaks or open/short circuits.
General| Size | 48 x 96 mm |
|---|---|
| Weight | Approx. 300 g |
| Input Type | Thermocouple, RTD, Analog |
| Output Type | Relay, Voltage, Current |
| Power Supply Voltage | 100 to 240 VAC |
| Display Type | Digital |
| Number of Control Outputs | 1 |
| Communication | RS-485 |
| Ambient Operating Temperature | -10 to 55 °C |
| Ambient Operating Humidity | 25 to 85% RH |
Explains the meaning of WARNING and CAUTION signals used in the manual for safety.
Lists important safety rules and guidelines to follow when using the product.
Defines abbreviations used for parameter names, figures, and text explanations.
Explains the correspondence between symbols displayed on the E5EN and their meanings.
Identifies and describes the components of the E5EN's front panel and display.
Explains the input/output configuration and the primary functions of the E5EN controller.
Details the setup levels and how to operate the front panel keys for configuration.
Describes how to configure and utilize the E5EN's communications function.
Provides instructions for the physical installation of the E5EN controller.
Details the terminal arrangements and wiring procedures for connecting the E5EN.
Provides step-by-step examples for common initial setup configurations of the E5EN.
Guides on selecting and setting the correct sensor input type for the E5EN.
Explains how to choose between Celsius (°C) and Fahrenheit (°F) for temperature display.
Describes how to select between PID and ON/OFF control methods for the E5EN.
Explains how to adjust input values to compensate for sensor characteristics and improve accuracy.
Details how to set alarm hysteresis for stable and reliable alarm operation.
Guides on configuring scaling upper and lower limits for analog input signals.
Explains how to perform and manage heating and cooling control operations using the E5EN.
Explains the meaning of icons and conventions used within Chapter 5 for parameter descriptions.
Details how to set and use the protect level to restrict parameter access and prevent unauthorized changes.
Lists and describes parameters accessible and configurable in the operation level.
Lists and describes parameters accessible and configurable in the adjustment level for fine-tuning.
Guides on configuring basic parameters like input type, scaling, and control modes.
Covers advanced settings including parameter initialization, multi-SP, and event inputs.
Details parameters for configuring communication settings such as baud rate and parity.
Explains the structure of parameters relevant to the calibration process.
Guides on performing user calibration for various input types.
Details the specific steps for calibrating thermocouple inputs.
Explains the procedure for calibrating analog input signals.
Lists the detailed electrical, environmental, and performance specifications of the E5EN.
Outlines the key technical characteristics, including hysteresis, integral time, and dielectric strength.
Provides specifications and dimensions for compatible current transformers.
Explains common error displays, their meanings, and corrective actions.
Lists parameters by level with their settings, display values, and defaults.
Provides comprehensive tables for sensor input settings and their corresponding indication ranges.
Offers a visual overview of the E5EN's setup levels and navigation paths.
Illustrates the logical flow and relationships between various parameters in the E5EN.
To Next Page
