##!*
SPECIFICATIONS
J
Ratings
%=995A >85<+1/ <8 ( B ( B (
"9/:+<371 >85<+1/ :+71/ <8 80 :+</. ;=995A >85<+1/
#8?/:
-87;=69<387
( ()
%/7;8: 379=< &2/:68-8=95/ & ' ! $ %
#5+<37=6 :/;3;<+7-/ <2/:686/</: #< #<
!87D-87<+-< </69/:+<=:/ ;/7;8: <8
_
<8
_
<8
_
<8
_
(85<+1/ 379=< <8 6(
87<:85
8=<9=<
$/5+A 8=<9=< + ( :/;<3>/ 58+. /5/-<:3-+5 530/ 89/:+<387;
37 +9953-+,5/ 58+. ( 6
(85<+1/ 8=<9=<
#!#
(
"
% 6+@ 58+. -=::/7< 6
( % 6+@ 58+. -=::/7< 6
)3<2 ;28:< -3:-=3< 9:8</-<387 -3:-=3<
=::/7< 8=<9=< D6 58+.
Ω
6+@ :/;85=<387 +99:8@
5+:6 8=<9=< %#%&D!" ( :/;3;<3>/ 58+. /5/-<:3-+5 530/ 89/:+<387;
37 +9953-+,5/ 58+. ( 6
87<:85 6/<28. D# 8: "!" -87<:85
%/<<371 6/<28. 313<+5 ;/<<371 =;371 0:87< 9+7/5 4/A;
7.3-+<387 6/<28. D;/16/7< .313<+5 .3;95+A +7. ;3715/D5312<371 37.3-+<8:
"<2/: 0=7-<387; --8:.371 <8 -87<:855/: 68./5
6,3/7< </69/:+<=:/ D <8
_
?3<2 78 -87./7;+<387 8: 3-371
6,3/7< 2=63.3<A $/5+<3>/ 2=63.3<A <8
%<8:+1/ </69/:+<=:/ D <8
_
?3<2 78 -87./7;+<387 8: 3-371
5<3<=./ 6 8: 5/;;
$/-866/7./. 0=;/ & ( <36/ 5+1 58? ;2=<800 -+9+-3<A
7;<+55+<387 /7>3:876/7< 7;<+55+<387 +</18:A #855=<387 5+;; -86953+7<
* For the setting ranges for each sensor input, see page AĆ10.
F
HBA
+@ 2/+</: -=::/7< %3715/D92+;/
79=< -=::/7< :/+.8=< +--=:+-A
±
%
±
.313< 6+@
/+</: ,=:78=< +5+:6 ;/<<371 :+71/ <8 =73<;
/+</: ,=:78=< +5+:6 8=<9=< <=:7; "
/+</: ,=:78=< +5+:6 8=<9=< <=:7; "!
37 ./</-<387 "! <36/ 6;
*1 When the control output ON time is less than 190 ms, heater burnout detection and heater current measurement are not
carried out.
To Next Page
Loading...
Need help?
General
