CompoWay/F
SECTION 2 CompoWay/F Communications Procedures
2-8
Note: No commands will be accepted and no responses will be returned
when a memory error (RAM error) has occurred or the Controller
is initializing (until the Controller recognizes the process value
after the power is turned ON).
06 01 Read Controller Sta-
tus
This service reads the operating sta-
tus.
08 01 Echoback Test This service performs an echoback
test.
30 05 Operation Command This service performs operations
such as RUN/STOP, executing/stop-
ping AT (auto-tuning), and moving to
Setup Area 1.
MRC SRC Name of service Processing
To Next Page
Loading...
Need help?
General
