Omron E5EC Solution Guide

Digital
Temperature
Controllers
E5CC/E5EC
Solutions Guide for FAQs
Using Basic Functions
Basic Setup Procedure
START
Connect sensor and operating terminal.
Turn ON power.
1. Setting the sensor type
2. Using ON/OFF control 3. Using PID control
Setting the set point
4. Setting temperature alarms
5. Setting heater
burnout alarms
Operation
CONTENTS
1. Setting the Sensor Type
2. Using ON/OFF Control
3. Using PID Control
4. Setting Temperature Alarms
5. Setting Heater Burnout Alarms

Omron E5EC Specifications

General

Mounting Type	Panel Mount
Display Resolution	0.1°C or 1°C
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Size	48 x 96 mm
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25 to 85% RH
Protection Rating	IP20