VI
CAUTION
Tighten the terminal screws to between 0.74 and 0.90 N·m. Loose
screws may occasionally result in fire.
Set the parameters of the product so that they are suitable for the
system being controlled. If they are not suitable, unexpected
operation may occasionally result in property damage or
accidents.
A malfunction in the Digital Controller may occasionally make
control operations impossible or prevent alarm outputs, resulting
in property damage. To maintain safety in the event of malfunction
of the Digital Controller, take appropriate safety measures, such
as installing a monitoring device on a separate line.
When inserting the body of the Digital Controller into the case,
confirm that the hooks on the top and bottom are securely
engaged with the case. If the body of the Digital Controller is not
inserted properly, faulty contact in the terminal section or reduced
water resistance may occasionally result in fire or malfunction.
When connecting the Control Output Unit to the socket, press it in
until there is no gap between the Control Output Unit and the
socket. Otherwise contact faults in the connector pins may occa-
sionally result in fire or malfunction.
To Next Page
Loading...
Need help?
General
