1F3S-TGR-N@C
Compact Magnetic Non-contact Safety Switches
F3S-TGR-N@C
Magnetic Coded Non-contact
switches are designed to inter-
lock hinge, sliding or removal
guard doors. All coded Non-con-
tact switches have a LED for
easy diagnosis.
• Coded actuator for applications requiring
anti tamper switches
• Non-contact = no abrasion =
no particles
• Excellent coverage of mechanical
tolerances
• Can operate behind stainless steel fittings
• Screw-hole covers support hygienic
design (NMPC)
• Conforms to safety categories up to
4 acc. EN 954-1 and PDF-M acc.
EN60947-5-3.
Model Number Structure
1. Type
L: Elongated Sensor
S: Small Sensor for NLPC and NSMC
M: Miniature Sensor
2. Housing Material
P: Plastic Housing
M: Stainless Steel Housing
3: Contact configuration
20: 2 Normally Closed Contacts (NC)
21: 2 Normally Closed Contacts (NC) +
1 Normally Open Contact (NO)
4: Cable Length/connection
02: 2m Cable
05: 5m Cable
10: 10m Cable
M1J8: M12 male connector, 8pin
4: Cable Length/connection for NMPC
02: 2m Cable, cable exit to the left
05: 5m Cable, cable exit to the left
10: 10m Cable, cable exit to the left
M1J8: M12 male connector, 8-pin, cable exit to the left
F3S-TGR-N@@C-@@-@@
12 3 4
E14E-EN-02+F3S-TGR-N_C+CodedTyp+Datasheet.fm Seite 1 Montag, 25. August 2008 10:56 10
To Next Page
Need help?
General
