Omron FULL BODY SENSOR BODY COMPOSITION MONITOR AND SCALE HBF-516 - Setting the Day; Setting the Hour; Setting the Minute; Adjusting Date and Time

20
SETTING THE DATE AND TIME
4.
1) Press the UP or DOWN button to change the day.
2) Press the SET button.
The day is set.
The hour flashes on the display.
5.
1) Press the UP or DOWN button to change the hour.
Make sure AM/PM is correct.
2) Press the SET button.
The hour is set.
The minute flashes on the display.
6.
1) Press the UP or DOWN button to change the minute.
2) Press the SET button.
The current settings for the year, month and day, hour and minute
appear in this sequence on the display. The monitor automatically turns off.
TO ADJUST THE DATE AND TIME
1) Turn the monitor on.
The CAL symbol blinks on the display, then the display
changes to 0.0 lb. Wait until 0.0 lb appears on the display.
2) Press and hold the SET button.
The year flashes on the display.
3) Refer to SETTING THE DATE AND TIME on pages 19
and 20.
SETTING THE DAY
SETTING THE HOUR
SETTING THE MINTUTE