How to fix low battery or no display on Omron HBF-514 Scales?
If you see the low battery indicator, no power, or no display on your Omron Scales, first check that the batteries are installed correctly, paying attention to the polarities. If they are correctly installed, replace all four batteries.
What to do if the weight value is abnormally low or high on Omron HBF-514 Scales?
If the weight value is abnormally low or high on your Omron Scales, ensure the monitor is placed on a hard and level floor for accurate readings.
What to do if the Body Composition value is abnormally low or high on Omron HBF-514?
If the Body Composition value is abnormally low or high on your Omron Scales, check the settings entered for your personal data and refer to RECOMMENDED MEASUREMENT TIMES on pages 12 and 13.
What to do if Omron HBF-514 Scales measurement does not start?
If the Omron Scales measurement does not start, it may be because the memory data is being updated. Wait one minute and then try again.
Why are measurement results slow to appear on Omron HBF-514 Scales?
If the measurement results are slow to appear on your Omron Scales, it might be because the measurement is being taken when the date is about to change. Please wait for the results to be displayed.
Key safety precautions during device operation.
Defines BMI and provides interpretation guidelines.
Explains body fat and its interpretation ranges.
Explains visceral fat and its interpretation.
Explains resting metabolism and energy use.
Explains skeletal muscle and its importance.
Steps to access the battery compartment.
Guide for correct battery insertion.
Instructions for closing the battery compartment.
Information on replacing batteries and important notes.
Steps to set the year.
Steps to set the month.
Instructions for setting day, hour, and minute.
Options for saving data or using guest mode.
How to switch between US and Metric units.
Step-by-step guide for taking a full body composition measurement.
Steps for initiating and finishing a measurement.
How to view detailed measurement results.
Lists error codes, causes, and solutions.
General| Type | Body Composition Monitor |
|---|---|
| Measurement Method | Bioelectrical Impedance Analysis (BIA) |
| Weight Capacity | 150 kg |
| Body Fat Percentage Increment | 0.1% |
| Body Fat Percentage Classification | Yes |
| Skeletal Muscle Percentage Increment | 0.1% |
| Skeletal Muscle Percentage Classification | Yes |
| Visceral Fat Level Classification | Yes |
| Resting Metabolism Increment | 1 kcal |
| BMI Increment | 0.1 |
| BMI classification | Yes |
| Number of User Profiles | 4 |
| Guest Mode | Yes |
| Display | LCD |
| Power Source | 4 AAA batteries |
| Weight Increment | 0.1 kg |
| Body Fat Percentage | 5.0% - 60.0% |
| Visceral Fat Level | 1 - 30 |
| Memory | Yes |
To Next Page