28
HOW TO TAKE A MEASUREMENT
4. Start the measurement.
1) Step onto the measurement platform and place your feet on the foot electrodes with your
weight evenly distributed.
Remain still and do not move until your weight measurement is complete.
2) When “START” appears on the display extend your arms straight at a 90° angle to your body.
3) When the measurement is completed, your weight is
displayed again. Step off the measurement platform.
If there is at least one result in memory, the high reading is
displayed in the My History area of the display.
NOTE: If there are no results in memory, “- - - -” is displayed.
The display will show your weight
and then the weight result will blink
twice.
The monitor will start to calculate
body composition.
The indicators in the measurement
progress bar at the bottom of the
display will gradually appear from
left to right, based on the
measurement being taken.
To Next Page
Loading...
Need help?
General
