Omron HCG-801 - User Manual

Questions and Answers

J
Juan HernandezSep 9, 2025
Why has ECG data disappeared from the SD card in my Omron Monitor?
- V
  Victoria Baker DDSSep 9, 2025
  If ECG data has disappeared from the SD memory card in your Omron Monitor, it's likely because the card was exposed to a strong electromagnetic field, electric noise, or static, which damaged the data. It could also indicate a defective card. Unfortunately, erased data cannot be recovered. Format the SD memory card again.
L
laura45Aug 23, 2025
What to do if my Omron HCG-801 Heart Rate Monitor finishes but shows no result?
- M
  Margaret ReedAug 23, 2025
  If your Omron Heart Rate Monitor shows no result after finishing the measurement, several factors could be at play. Here's what to check: * Ensure the electrodes make good contact with your finger or chest, consulting the instructions for correct placement, and repeat the measurement. * Try to relax and repeat the measurement, because tension in your body can interfere with readings. * Confirm that your finger and chest maintain contact with the electrodes for the entire 30 seconds of data recording. * Make sure the chest electrode is applied to bare skin, not over clothing. * Moisten your skin with a damp towel if it's dry. If the ECG signal remains weak even with correct electrode application, measurement may not be possible for some individuals.
S
Scott BerryAug 25, 2025
Why does my Omron Heart Rate Monitor say 'Analysis impossible'?
- R
  Rebecca WilliamsAug 25, 2025
  If your Omron Heart Rate Monitor displays the message “Analysis impossible. Please measure again.”, it means the measurement data couldn't be analyzed. Please check the instructions and repeat the measurement.
C
Cody ReyesAug 26, 2025
Why did the ECG data disappear from the SD memory card in my Omron HCG-801?
- S
  Sharon HuffAug 26, 2025
  If the ECG data has disappeared from your Omron Heart Rate Monitor, and you're using an SD memory card, it might be because the card was exposed to a strong electromagnetic field, electric noise, or static. This can damage the data stored on the card. To resolve this, format the SD memory card again.
S
Stacey GonzalesAug 27, 2025
Why did the ECG data disappear from my Omron HCG-801 Heart Rate Monitor?
- C
  Charles BryantAug 27, 2025
  If ECG data has disappeared from your Omron Heart Rate Monitor, it could be due to worn-out batteries or if the batteries have been removed for over one hour. The unit cannot store data if left with worn batteries for an extended period. Replace the batteries with new ones as soon as possible after the warning message appears.
R
robinsoneduardoAug 29, 2025
How to fix an Omron HCG-801 that does not turn on?
- A
  ashlee90Aug 29, 2025
  If nothing happens when you press the button on your Omron Heart Rate Monitor, it is likely due to worn-out batteries or incorrectly inserted batteries. Replace both batteries with new ones and ensure they are inserted with their polarities correctly aligned.
L
Luke CooperSep 17, 2025
Why is my Omron Heart Rate Monitor not turning on?
- N
  Nicholas MccartySep 17, 2025
  If your Omron Heart Rate Monitor does nothing when you press the button, it means the batteries are either worn out or inserted incorrectly. Replace both batteries with new ones and ensure they are inserted with the correct polarities.
A
achavezSep 18, 2025
What to do if I have other problems with my Omron Heart Rate Monitor?
- C
  codywallaceSep 18, 2025
  If you are experiencing other problems with your Omron Heart Rate Monitor, turn off the unit and try again. If the data and time or other settings have been reset to their default values, set them again.
K
Kevin SullivanSep 7, 2025
What to do if Omron Monitor shows 'Analysis impossible'?
- M
  Mathew ReeseSep 8, 2025
  If the Omron Monitor displays “Analysis impossible. Please measure again”, it means the measurement data couldn't be analyzed. This could be due to several reasons: * Poor contact between the electrodes and your finger or chest. * Body tension. * Electrode contact breaking before 30 seconds. * Chest electrode applied over clothing. * Dry skin. To resolve this, check the instructions and repeat the measurement. Ensure your finger and chest maintain contact for the full 30 seconds, apply the chest electrode to bare skin, relax your body and moisten your skin with a damp towel if it is dry.
A
Andrew ChavezSep 4, 2025
What to do if Omron HCG-801 displays the message 'Cannot measure. Please follow the instructions for use.'?
- B
  Billy HillSep 4, 2025
  If your Omron Heart Rate Monitor displays the message “Cannot measure. Please follow the instructions for use,” it means that an ECG wave-pattern could not be detected. Check the instructions and repeat the measurement.