1. Press the ON/OFF / STOP button to turn the unit on.
The unit displays the following reminder. “Self-measurement is not the
same as medical diagnosis. Please consult your doctor for proper
interpretation.” Next, the guidance screens are displayed.
NOTES:
• You can press the START button to begin a measurement even
while the guidance screens are being displayed.
• The word “electrode” in this Instruction Manual is described as
“sensor” in the guidance screen.
2. Make sure that you are in a relaxed position.
The ideal posture is one where you are seated comfortably with your back straight.
NOTE: You can also take a measurement while you are standing or while lying down.
3. Place your index finger so that it fits closely over the two finger
electrodes.
NOTE:
• Take care not to press the START button until you are ready to
take the measurement.
WARNING: Even if you are left-handed, use your right hand
to take a measurement.
HOW TO TAKE A MEASUREMENT
25
Fit finger closely on the
electrodes.
Do not press START button
until ready to take measurement.
To Next Page
Loading...
