The GRAPH menu is used to display the list of ECG data stored on the SD memory card or in unit
memory.
1. Press the MENU button while the unit is turned on, the GRAPH menu is highlighted. If you then press
the SELECT button, the list of ECG data is displayed.
2. Select the ECG data you wish to view from the GRAPH menu list, then press the SELECT button to
display the detailed view of the waveform.
Each stored ECG data is displayed by date, time and a character representing the measurement data
description. Refer to page 48 - 49 for an overview of possible characters and messages.
HOW TO DISPLAY ECG DATA
30
To Next Page
Loading...
