Omron HEM-431C - Know Your Omron HEM-431 C Unit; Battery Installation and Replacement Guide

3
KNOW YOUR UNIT
BATTERY INSTALLATION/REPLACEMENT
1 Slide battery cover off in direction of arrow
2 Install one 9 volt size battery so + (positive) and -(negative)
polarities match the polarities of the battery compartment as
indicated
3 Replace the battery cover
4 If the Low Battery Indicator appears on the display, replace
the battery A long-life alkaline battery is recommended
5 Remove the battery if the monitor will not be used for an
extended period of time
Low
Battery
Indicator
Systolic
Blood Pressure Display
On/Off
Button
Air Pressure
Release Button
Air Jack
Ination Bulb
Ination
Bulb Hose
Cuff House
Air Jack
Arm Cuff
Cuff Tab
Diastolic
Blood Pressure/Pulse Display