Omron HJ-320 - Memory Functionality; Viewing Stored Measurements

13
MEMORY FUNCTION
The unit stores 7 days of measurements for steps and distance.
The current day’s data is automatically stored in memory when the time reaches
12:00AM (0:00). The display will return to 0.
NOTE: • Thetimemustbecorrectlysetintheunit.
1 Press
to select the type of measurement you want to see (steps or distance).
2. Press
to view the results (days 1-7) in memory.
The display changes with each press of
as shown below.
 • Keep
pressed to automatically change the display until the current display is
displayed.
NOTE: • Ifnobuttonispressedformorethan1minute,thedisplaywillreturnto
the current day’s data.