Why does my Omron Pedometer display wrong values?
Incorrect displayed values on your Omron Pedometer can occur due to several reasons: * The unit might be attached incorrectly. Please refer to the section on “How to Attach the Pedometer”.* You may be walking at an inconsistent pace. Try to maintain a consistent rhythm while walking.* The set values might be incorrect. In this case, change the settings.
What to do if nothing is displayed on my Omron HJ-112?
If nothing is displayed on your Omron Pedometer, it could be due to the following reasons:1. The polarities of the battery (+ and -) are aligned in the wrong directions. Ensure you insert the battery with the correct alignment.2. The battery is worn. Replace it with a new CR2032 battery.
How to fix a blinking mark on an Omron Pedometer?
A blinking mark on your Omron Pedometer indicates that the battery is low. Replace the battery with a new one (CR2032).
General| Type | Pedometer |
|---|---|
| Display | LCD |
| Step Count | Yes |
| Distance Measurement | Yes |
| Calorie Measurement | Yes |
| Memory Function | Yes |
| Memory | 7 days |
| Battery Type | CR2032 |
| Water Resistance | No |
| Step Count Range | 0 - 99, 999 steps |
| Battery Life | Approximately 6 months (based on 10, 000 steps per day) |
| Measurement Accuracy | ±5% |
| Dimensions | Approx. 2.2 (w) x 1.5 (h) x 0.5 (d) inches (57 x 39 x 13 mm) |
Details the pedometer's display, buttons (RESET, MEMORY/SET, MODE), and back components like the system reset button.
Identifies the battery cover, screw, and system reset button located on the back of the pedometer.
Explains the use of the holder, strap, and clip for attaching the pedometer to clothing.
To Next Page
